for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com freq. multipliers - active - smt 7 7 - 46 hmc370lp4 / 370lp4e smt gaas hbt mmic x4 active frequency multiplier, 14.4 - 16.4 ghz output v04.0110 general description features functional diagram electrical speci cations, t a = +25 c, vcc = 5v typical applications the hmc370lp4(e) is ideal for: ? point-to-point & vsat radios ? fiber optic ? military the hmc370lp4(e) is an active miniature x4 fre- quency multiplier utilizing ingap gaas hbt technology in a 4x4 mm leadless surface mount package. power output is 0 dbm typical from a 5v supply voltage and varies little vs. input power, temperature and supply voltage. suppression of undesired fundamental and sub-harmonics is >22 dbc typical with respect to output signal level. the low additive ssb phase noise of -140 dbc/hz at 100 khz offset helps the user maintain good sys- tem noise performance. the hmc370lp4(e) are ideal for use in lo multiplier chains allowing reduced parts count vs. traditional approaches. output power: 0 dbm sub-harmonic suppression: >22 dbc ssb phase noise: -140 dbc/hz single supply: +5v @ 55 ma 24 lead 4x4 mm smt package: 16 mm 2 parameter min. typ. max. units frequency range, input 3.6 - 4.1 ghz frequency range, output 14.4 - 16.4 ghz input power range -15 +5 dbm output power -4 0 dbm sub-harmonic suppression 22 dbc input return loss 18 db output return loss 7db ssb phase noise (100 khz offset) pin = 0 dbm -140 dbc/hz supply current (icc) 55 73 ma
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com freq. multipliers - active - smt 7 7 - 47 -6 -5 -4 -3 -2 -1 0 1 2 3 4 14 14.4 14.8 15.2 15.6 16 16.4 16.8 +25 c +85 c -40 c output power (dbm) output frequency (ghz) -6 -5 -4 -3 -2 -1 0 1 2 3 4 14 14.4 14.8 15.2 15.6 16 16.4 16.8 -20 dbm -15 dbm -10 dbm -5 dbm 0 dbm +5 dbm output power (dbm) output frequency (ghz) -6 -5 -4 -3 -2 -1 0 1 2 3 4 14 14.4 14.8 15.2 15.6 16 16.4 16.8 vcc=4.5v vcc=5.0v vcc=5.5v output power (dbm) output frequency (ghz) -40 -35 -30 -25 -20 -15 -10 -5 0 0123456 +25 c +85 c -40 c return loss (db) frequency (ghz) -25 -20 -15 -10 -5 0 8 9 10 11 12 13 14 15 16 17 18 +25 c +85 c -40 c return loss (db) frequency (ghz) output power vs. temperature @ -10 dbm drive level output power vs. supply voltage @ -10 dbm drive level output power vs. drive level input return loss vs. temperature output return loss vs. temperature hmc370lp4 / 370lp4e smt gaas hbt mmic x4 active frequency multiplier, 14.4 - 16.4 ghz output v03.0907
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com freq. multipliers - active - smt 7 7 - 48 -60 -50 -40 -30 -20 -10 0 10 0 2 4 6 8 101214161820222426 output power (dbm) frequency (ghz) output spectrum -160 -140 -120 -100 -80 -60 -40 -20 0 10 2 10 3 10 4 10 5 10 6 10 7 pin = 0 dbm pin = -10 dbm ssb phase noise (dbc/hz) offset frequency (hz) ssb phase noise performance, fout= 15.0 ghz hmc370lp4 / 370lp4e smt gaas hbt mmic x4 active frequency multiplier, 14.4 - 16.4 ghz output v03.0907
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com freq. multipliers - active - smt 7 7 - 49 absolute maximum ratings outline drawing typical supply current vs. vcc vcc (v) icc (ma) 4.5 54 5.0 55 5.5 57 rf input (vcc = +5v) +20 dbm vcc +5.5v channel temperature 135 c continuous pdiss (t=85 c) (derate 8.1 mw/c above 85 c) 530 mw thermal resistance (r th ) (junction to ground paddle) 123.6 c/w storage temperature -65 to +150 c operating temperature -40 to +85 c note: multiplier will operate over full voltage range shown above. electrostatic sensitive device observe handling precautions notes: 1. leadframe material: copper alloy 2. dimensions are in inches [millimeters] 3. lead spacing tolerance is non-cumulative. 4. pad burr length shall be 0.15mm maximum. pad burr height shall be 0.05mm maximum. 5. package warp shall not exceed 0.05mm. 6. all ground leads and ground paddle must be soldered to pcb rf ground. 7. refer to hittite application note for suggested land pattern. part number package body material lead finish msl rating package marking [3] hmc370lp4 low stress injection molded plastic sn/pb solder msl1 [1] h370 xxxx HMC370LP4E rohs-compliant low stress injection molded plastic 100% matte sn msl1 [2] h370 xxxx [1] max peak re ow temperature of 235 c [2] max peak re ow temperature of 260 c [3] 4-digit lot number xxxx package information hmc370lp4 / 370lp4e smt gaas hbt mmic x4 active frequency multiplier, 14.4 - 16.4 ghz output v03.0907
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com freq. multipliers - active - smt 7 7 - 50 pin description pin number function description interface schematic 1, 2, 5-14, 17, 18, 20-24 n/c the pins are not connected internally; however, all data shown herein was measured with these pins connected to rf/dc ground externally. 3rfin rf input needs to be dc blocked only if there is an external dc voltage applied to rf in. 4, 15 gnd all ground leads and ground paddle must be soldered to pcb rf/dc ground. 16 rfout multiplied output. ac coupled. no external dc blocks necessary. 19 vcc supply voltage 5v 0.5v. hmc370lp4 / 370lp4e smt gaas hbt mmic x4 active frequency multiplier, 14.4 - 16.4 ghz output v03.0907
for price, delivery, and to place orders, please contact hittite microwave corporation: 20 alpha road, chelmsford, ma 01824 phone: 978-250-3343 fax: 978-250-3373 order on-line at www.hittite.com freq. multipliers - active - smt 7 7 - 51 evaluation pcb item description j1 - j3 pcb mount sma connector c1 1,000 pf capacitor, 0603 pkg. u1 hmc370lp4(e) x4 active multiplier pcb [2] 104610 eval board [1] reference this number when ordering complete evaluation pcb [2] circuit board material: rogers 4350 the circuit board used in the application should be generated with proper rf circuit design tech- niques. signal lines should have 50 ohm imped- ance while the package ground leads and exposed paddle should be connected directly to the ground plane similar to that shown. the evaluation circuit board shown is available from hittite upon request. list of materials for evaluation pcb 106137 [1] hmc370lp4 / 370lp4e smt gaas hbt mmic x4 active frequency multiplier, 14.4 - 16.4 ghz output v03.0907
|
